Starlink Gen 3 Mounts: Roof, Wall, Pole and Marine

Mount Your Gen 3 Securely

Starlink Gen 3 mounts from Air Vision Systems cover roof, wall, pole and marine installs for the Gen 3 dish, also sold as Starlink Standard and Standard 4. Every mount is stocked in New Zealand with fast dispatch and local support.

The Gen 3 dish is larger and heavier than Mini, so it needs a mount built to handle greater size and wind load. Air Vision Systems stocks a range of Gen 3 mounts⁠ in powder coated marine grade aluminium or weather resistant steel, suited to fixed installs, vehicles, boats and repeated setup and pack down.

Looking for Mini mounts too? Browse all Starlink mounts.

WHICH SETUP DO YOU NEED

Find the Right Gen 3 Mount

Marine grade bracket

A practical, sturdy bracket in white powder coated marine grade aluminium with a signal transparent polycarbonate cover, suited to RVs, motorhomes, caravans, off road vehicles, boats and yachts. Straightforward installation with a provided guide.

Mobility mount

Built with a waterproof seal, corrosion resistant stainless steel fasteners and an 8 degree adjustable tilt for optimal signal reception, this mount suits wood, fibreglass, metal, plastic and slotted rail surfaces, and is compatible with Standard Starlink models.

Starlink Gen 3 mounts on a home roof with the Air Vision Systems mounting kit

Roof and wall mounting kit

For a Starlink roof mount or wall mount, the flexible base mounting kit adjusts from 30 to 180 degrees, so the dish sits level on a pitched roof or an exterior wall. Made from heavy duty weather resistant steel with a protective powder coating, it comes with the mount, screws and a pole adapter. Suitable for homes, sheds and baches.

Clip in pole adapter

A heavy duty pole adapter for fitting the Gen 3 dish to a pole, mast or railing instead of a flat surface. Use it where there’s nothing flat to bolt a bracket onto, or on a pole fixed to a wall or roof to lift the dish clear of trees or a roofline. See the 4x4 and off-road⁠ page for roof rack and bull bar specific options.

YOUR MOUNTING STYLE

Choosing between a fixed and a portable mount

Fixed Installation

Permanent home, cabin or rural property installation: the flexible base mounting kit or a residential bundle gives a clean, professional, adjustable setup

Adjustable Setup

Vehicles or boats: the marine grade bracket gives a secure, weatherproof fit for regular use

Mobile Installation

Sites used occasionally: a tripod setup is usually the lighter, more portable option, since it doesn’t need to attach to a vehicle, boat, or existing structure at all

Exposed Environments

Exposed or marine environments: prioritise marine grade aluminium and 316 stainless steel fasteners regardless of which mount style you choose

Make Sure It Fits Your Gen 3, Standard or Standard 4 Dish

Check the important details before choosing your Gen 3 mount.

Compatibility

Confirm your dish is Gen 3-V4, Standard 4 or Standard 4X before ordering, compatibility varies slightly across Starlink’s naming for this dish generation. Not sure which dish you have? Check Starlink's specifications page.

Mounting Surface

Check the wall, roof or pole surface can support the dish’s size and wind load, Gen 3 is larger and heavier than Mini

Size & Fit

Confirm the mount is designed for Gen 3 specifically, not Mini, connectors and fittings are not interchangeable between the two

FAQs

Gen 3 Mount Questions

Helpful answers for choosing the right Starlink Gen 3 mounting solution.

For most homes, the Starlink Gen 3 Mounting Kit is the simplest roof mount. It adjusts from 30 to 180 degrees to suit roof pitch and is made from powder coated steel built for New Zealand weather. For a complete fixed setup on a home, bach or cabin, the residential bundle includes everything in one order. If the roof is shaded, fitting the dish to a suitable pole or mast with the Clip In Pole Adapter lifts it clear of trees and other obstructions.

Can I mount Gen 3 on a caravan or boat?

Yes, the marine grade bracket is suited to RVs, caravans, boats and yachts. See the caravan⁠ and marine⁠ pages for setup specific guidance.

What is the difference between the mobility mount and the flexible base kit?

The mobility mount suits a wider range of surfaces (wood, fibreglass, metal, plastic, slotted rails) with an 8 degree tilt, while the flexible base kit offers a much wider 30 to 180 degree adjustment range, better suited to wall or roof installs needing precise alignment.

Yes. The Starlink Gen 3 Mounting Kit fixes to an exterior wall as well as a roof, and its adjustable base lets the dish be angled correctly from a vertical surface. A wall mount is often the easiest option on single storey homes, sheds and baches.

Yes. The Gen 3 V4 Router and Power Supply Wall Mount Kit holds both neatly on an indoor wall. It’s a separate product from the dish mounts on this page.

Shopping Cart
Scroll to Top